•  
    • Used for injection grouting and stage ground treatment the valve injection pipes are a versatile pipe which enables you to target exactly where your treatments need to be made in any type of strata. The valve injection pipes are utilised to great effect throughout specialist geotechnical applications from dams and tunnels, to underpinning and reinforcing damaged foundations, tie rods and anchorages.

      Depending on the site specific needs there are wide range of materials, seals, sizes, thicknesses and connections for all applications and scenarios. AS we appreciate these schemes tend to vary from job to job so if its plastic or steel TaM’s you need with specialised ports to hold back high pressure ground water and silts you may be best to give us a call.

      So you are aware the standard OD sizes start from 33.0 – 48.0mm with section lengths from 0.5 – 6.0m. The valve pitch or port distance range from 0.25 – 1.0m**

      We also provide all the plain lengths, end caps, packers, high pressure lines, gauges and fittings, mixers and pumps you’ll most likely need to complete the works.

      **All sizes and specifications are standard issue however should you need a more bespoke solution, special arrangements can be made to suit any application you may have. Simply contact us or send through your inquiry and a member of our team will be able to answer or advise on any of your queries.

    • Ask a Question

      If you have a question regarding this product, simply fill out the form below and we'll get back to you as soon as we can.

      Captcha Image
    • Delivery

      Please see our Delivery Policy for information on delivery and returns.

    Product Name: 'Valve Injection Pipes' // Product URL: '/products/water-well-systems/pipes/valve-injection-pipes' // Product Code: 'K0TNUOA8T6'
    I have an enquiry regarding 'Valve Injection Pipes'.

“Sonic Drilling are always very knowledgeable and extremely helpful assisting us with our various drilling supply needs”

Shop By Product